03-6491202
Contact Us

Name:
Phone:
E-mail:
Company:
Comment:

Falling Dart Impact Tester

Technical Specifications


SpecificationsFDI-01
Test MethodMethod A or Method B is optional
Test RangeMethod A: 50~2000 g 
Method B: 300~2000 g
Accuracy0.1g (0.1J)
Specimen ClampPneumatic Clamp
Pressure of Gas Supply0.6 MPa (outside of supply scope)
Port of Gas SupplyΦ8 mm PU Tubing
Specimen Size> 150 mm x 150 mm
Power SupplyAC 220V 50Hz
Net Weight70 kg
Instrument DimensionMethod A: 500 mm (L) x 450 mm (W) x 1320 mm (H)
Method B: 500 mm (L) x 450 mm (W) x 2160 mm (H)



Principle

Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas.

Standards

This instrument conforms to various national and international standards:
ASTM D1709, ISO 7765-1-1988, JIS K7124-1, GB/T 9639.1-2008

Applications:

Basic Applications
  • Impact resistance test of plastic films, sheets and composite films e.g. PE preservative films, wrapping films, PET sheets and other food package and heavy packages
  • Impact resistance test of aluminum foils and aluminum plastic composite films
  • Impact resistance test of paper and paper board
  • Extended Applications
  • Test the resistance of the specimen against the falling ball. Mount the specimen on specific clamp for falling ball impact test and select falling ball of certain weight for the impact test. Check the status of the specimen and determine the impact resistance of the specimen
  • Impact test of shoulder lining. Mount the shoulder lining specimen to the specified clamp and select falling dart of certain weight for impact test. Check the status of the specimen and determine the impact resistance of the shoulder lining specimen.

  • Windows menu interface and touch screen are convenient for the user to set test parameters quickly
  • 2 test methods of A & B and automatic determination of testing status
  • Electromagnetic suspension and automatic release of the falling dart reduce the errors caused by manual operation
  • Pneumatic clamping, 2 starting modes of manual and pedal switch and built-in observation light are convenient to the user's operation
  • Professional software supports multi-unit result display, graphic display of testing process and data export and printing
  • Equipped with RS232 port and micro printer port which is convenient for data transmission and PC connection
  • Supports LystemTM Lab Data Sharing System for uniform and systematic data management

  • Contact Information

    Address:
    Itec Ltd.
    38th HaBarzel St. Ramat Hachayal,
    Tel-Aviv 6971054

    Tel: +972-3-6491202
    Fax: +972-3-6497661
    Go Back »