03-6491202
Contact Us

Name:
Phone:
E-mail:
Company:
Comment:

LTCM500 Series Motorized Test Stand (550 lbf / 2.5 kN)

The CHATILLON® LTCM500 Series is an economical, motorized tester optimized for product floor operation. When combined with a Chatillon DF Series digital force gauge, it provides users with an easy-to-use testing system for tensile, compression, peel and flexural testing applications. 

The LTCM500 Series features a large working area and 5-inch (130mm) throat ideal for large sample sizes. The base features T-slot table for fitting fixtures and specialized testing jigs. Crosshead travel is controlled from a simple console or using an optional footswitch controller. Crosshead travel extends to 29 inches (750mm). Speed may be set from 0.2 to 20 in/min or 5 to 500 mm/min. A digital display indicates the travel speed during a test. The return speed may be configured to automatically return at maximum speed. Mechanical deflection limits, located on the column face can be used to set travel limit setpoints. The crosshead will stop when either the upper or lower deflection limit is contacted. An acrylic splinter shield is optionally available. The shield helps contain samples that may fracture during a test. 

The LTCM500 Series can also use the digital output of a Chatillon DF Series digital force gauge to stop crosshead travel when a load limit is achieved. 

The LTCM500 Series is supplied with a hook and compression plate and certificate of conformance.  



Features & Benefits
  • Tensile, Compression, Peel & Flexural Testing
  • Compact, Lightweight, Bench-top Design
  • Simple Operation 
    - Console Controls for Speed & Travel 
    - Optional Footswitch Remote Controller 
    - Independent Return Speed
  • Mechanical Deflection Limits
  • Digital Load Limits (with Chatillon DF Gauge)
  • T-Slot Work Area
  • 2-Year Warranty
Applications:


  • Perform a compression test using a DG gauge attached to the LTCM500 to check the force necessary to crush material to ensure it will stand up to storage

  • Use the LTCM500 with a DFS II to check to see if plastic packaging with hold your end product without breaking and releasing its contents

  • Set a bottom limit on the LTCM500 and attach a DFE II to check the consistency of the strength of a raw material that will be compressed during the production process

Contact Information

Address:
Itec Ltd.
38th HaBarzel St. Ramat Hachayal,
Tel-Aviv 6971054

Tel: +972-3-6491202
Fax: +972-3-6497661
Go Back »